Nylon 1000D beef tendon cloth Bulletproof Vest Tactical Vest NO.99 NIJ Level III Body Armor

I.It consists of the main body of the vest and its fixed or combined components.
II.The main body of the Oxford cloth tactical vest has a three-layer structure, with upper and lower fabrics and linings.
Product Features:
There are two shoulder loops, intercom loops, handcuff pockets, horizontal pockets, left magazine pocket, and right magazine pocket sewn on the front panel; the butt pad is fixed with hanging rings and threaded buttons.
Product specifications: black, one size fits all
bulletproof:
Fabric: Nylon 1000D beef tendon cloth
Protective layer structure: The protective layer structure of the bulletproof and stab-proof clothing is composed of 45 layers of polyethylene fiber weft-free cloth (four orthogonal layers) + 1 layer of 4.5mm thick foam.
Composition: Bulletproof and stab-proof clothing consists of jacket, bulletproof layer, and bulletproof layer protective cover. The jacket is removable and washable and has adjustable shoulder and waist sizes.
Casing sealing performance: The protective layer is sealed with a water-tight and impermeable black protective casing with even sealing edges. The protective cover material is water-resistant and has a hydrostatic pressure resistance of not less than 18kPa.
Flexible to wear: Flexible to wear, easy to put on and take off. After wearing it, the free movement of the arms and the human body's kneeling, jumping, running, pitching, turning and other movements cannot be significantly restricted.
Protection area: The protection area is not less than 0.25 square meters

Anti-stab:

The stab-proof inner core is composed of 16 layers of high-performance polyethylene, and the stab-proof layer of the stab-proof vest is made of a black, dense, waterproof and light-proof protective cover.
Using standard test tools and counterweights, a 2.4kg drop body is formed at room temperature to test puncture resistance. The impact energy of 24J plus or minus 0.5J can effectively sprint into stab-proof clothing with penetration angles of 0 degrees, 45 degrees, and without penetrating.

Room temperature bulletproof performance:The test was conducted using 1979 7.62mm and 1951 7.62mm. The maximum dent depth should be less than or equal to 25mm when a valid impact is blocked.
Water immersion bulletproof: Soak the bulletproof and stab-proof clothing in water for 30 minutes at room temperature, and then perform a bulletproof test. In the case of effective hits, it can resist bullets, and the maximum dent depth of the backing should be less than or equal to 25mm.
High-temperature ballistic performance: After the high-temperature test (+55℃±2℃, constant temperature for 4 hours), test the ballistic performance within 15 minutes. In the case of an effective hit, the warhead is blocked and the maximum dent depth of the backing is less than or equal to 25 minutes.
Low-temperature bulletproof performance: After the low-temperature test (-20℃±2℃, constant temperature for 4 hours), conduct the bulletproof performance test within 15 minutes. In the case of an effective hit, the bullet is blocked and the maximum intrusion depth of the backing is less than or equal to 25 minutes.
Bulletproof and moist heat performance: After passing the damp and heat test (70℃±2℃, relative humidity 80%, 240h), the bulletproof performance test is carried out. In the case of effective hit, the warhead is blocked, and the maximum intrusion depth of the warhead backing is less than or equal to 25min.
Body armor grade: NIJ Level III

NIJ Ballistic Test Report
All Hikepros body armor and vests must pass the NIJ ballistic test before they are sold on the market. They are essential tactical equipment for soldiers and police.