Heat-resistant aluminum foil composite fabric and pure cotton lining
Fireproof, heat insulation, high-temperature resistance, anti-iron water splash.
Anti-radiation 1000 degrees, folding resistance, wear-resistant, easy to wear.
It is made of heat-resistant aluminum foil composite fabric and pure cotton lining, aramid high-temperature resistant flame retardant thread.
The full set includes a cap, a coat, suspender trousers, a pair of gloves, and a pair of shoe covers.
Applicable to steel plant work, firework, radiation protection work, dust work, welding work, etc.

Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

The main technical parameters:
Flame Retardant Performance: Damaged length is 50mm in the warp direction and 55mm in latitude direction, continuous burning time: 0 s, no melting or dripping phenomenon
Peel strength: 31N/30mm in warp direction, 13N/30mm in weft direction
Fracture ability: 2011N in warp direction, 1500N in weft direction
Hydrostatic pressure resistance performance: >20KPa
High-temperature resistance of hard attachments: At a temperature of 260℃, the original function will be maintained after 5 min.
Flame and radiant heat (thermal) protection performance: TPP>33.3cal/cm²

Size selection:

• XXXL for Height 1.85~1.9m (6'~6'3")
• XXL for Height 1.8~1.85m (5'11"~6')
• XL for Height 1.75~1.8m (5'9"~5'11")
• L for Height 1.7~1.75m (5'7"~5'9"）
• M for Height 1.65~1.7m（5'4"~5'7"）
• S for Height 1.6~1.65m（5'2"~5'4"）

If you are not sure which size you should buy, please kindly tell us your height and weight, and we will recommend the right size for you.

The main temperature resistance function
This fireproof suit can reflect less than 90% of radiant heat.
This heat-resistant suit can reach 1 hour when the temperature is close to 300℃ (572℉).
This fire-resistant clothing can reach 30 minutes when the temperature is 500℃ (932℉).
This fireproof heat-resistant suit can be instantly close to the high-temperature environment of 1000℃ (1832℉).
Resistance to radiant heat penetration: The time for the inner surface temperature rising to 24°C ( 75.2℉) is 68.2S.
When the temperature is 800℃ (1472℉) and 1.75m away from the fire source, the inner surface temperature of the heat-resistant fireproof clothing is not more than 25℃ (77℉) in 2min.
Features: flame retardant, heat insulation, anti-radiant heat, abrasion resistance, folding resistance, anti-sputtering of a small amount of high-temperature objects.

Wearing method
1. Wear pants first, then adjust the adjustment ring on the pants strap according to your height.
2. Put on your jacket, close the nylon clasp on the chest, and then press the metal buttons on, down, left, and right.
3. When wearing foot cover, be sure to cover the bottom of the pants, in case Mars fall into the foot cover.
4. When wearing a hat, be sure to adjust the safety headband, and make the binocular lens in the center of the field of vision.
5. Finally, put on the gloves, cover the cuff of the jacket over the gloves, and press the alloy button to show the completion of the dressing.
Note: It is strictly forbidden to use when the aluminum foil on the surface of the thermal insulation suit is damaged or peeled off! Please check once a week!

This thermal radiation suit is the protective clothing worn by firefighters and high-temperature workers during work.
This heat-resistant fireproof clothing can effectively ensure that firefighters and workers in high-temperature places approach the heat source without being burned by heat, flame, and steam.
Applications: Aerospace, fire protection, explosion-proof, metallurgy, forestry, petroleum, chemical industry, and electric power industries.
Scope of application: Protective clothing worn by industries such as fire fighting, petrochemical industry, metallurgy, steel making, glass, furnace, etc. in the face of molten iron sputtering and high-temperature occasions.
If there is a problem with the thermal insulation clothing, if it cannot be repaired, or if the overall protective performance is still affected after the repair, it shall not be used on the work site.
Note: When working near the flame area, it shall not be in direct contact with the flame and molten metal.
Maintenance
If the surface of the thermal insulation suit is dirty, it needs to be scrubbed. When scrubbing, use a soft brush dipped in neutral detergent to clean the surface residue, then wash it with water, and hang it in a ventilated place to dry naturally. It is prohibited to soak and hammer with water.
Storage: Store the heat-insulated clothing in a ventilated place and dry it if necessary to prevent moisture.

1. Do I need to have an account to order?

15. How Do I Cancel An Order?

We are only able to cancel orders within the first 12 hours after the order is placed. After that, the order has most likely been processed and is preparing for shipment or has been shipped. Once this takes effect, it's out of our hands. We apologize for any inconvenience this may cause, but we pride ourselves on prompt service and this includes getting your orders out as fast as possible.

16. What Is Your Return Policy?

If there’s something wrong with your order (defective product, incorrect order, damaged order, etc.), please contact us within 7 days of receiving your order and we’ll be happy to assist you in reviewing the case and if it is approved we will be sending a replacement. Please do not return anything before we review the case, our customer service team will review the request and will send further instructions. Our store reserves the right to deny any return request.

You will be responsible for paying for your own shipping costs for returning your item. Original shipping charges are not refundable.

Cancellation

We accept order cancellations before the product is shipped or produced. If the order is canceled you will get a full refund. We cannot cancel the order if the product is already shipped out.

Returns (if applicable)

We accept the return of products. Customers have the right to apply for a return within 30 days after the receipt of the product.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer.

Customers will only be charged once at most for shipping costs (this includes returns); No-restocking fee to be charged to the consumers for the return of a product.

Refunds (if applicable)

Once your return is received and inspected, we will email you a notification of receipt. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, usually within 5 business days.

Late or missing refunds (if applicable)

If you haven’t received a refund yet, first check your bank account again.

Then contact your credit card company, it may take some time before your refund is officially posted. Next, contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund, please contact us at support@hikepros.com.

Please contact our Customer service at support@hikepros.com to get the return address.